discussion   |   photos   |   email   |   myProfile   |   home          Login Now | Sign Up


New As Posted | Active Subjects



Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Feeding Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 02-25-2017, 19:14 Post: 35656
SOB1
2017-02-25
Post: 35656
 Equiptment to Hay with..

I'm interested in finding out what type of equiptment and the cost of same is needed to harvest Hay? I need round bales instead of square ones. I'd like to buy decent used stuff instead of new....

Thanks






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us |
 02-26-2017, 00:08 Post: 35658
Peters



Join Date:
Location: Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 102
 Equiptment to Hay with..

Large round bales weight a lot they are basicly 10x a 60 lb square bale. Most small tractors have difficulty moving a large bale. You are basicly at the limit of the machines capacity. The CG of the bale is beyond the tractors operation.
Used Equipment list
Balers - 10 K - 15K used need ~ 60 hp minimum.
Tractor with front end loader. 6 - 10 K used ~ 60 HP
Trailer for moving bales. 1 - 3 K
Disk Mower - 2 - 6K depending on size
Hay rake 1-3K
At 25$-35$ a bale it is difficult to pay off the equipment necessary. I am talking bare minumum prices for equipment here and you would need to be able to repair the equipment.
Alternatively small round balers are available that will run with smaller equipment.
There are older small round balers but are rare in this area of the country. Look in ND, SD or MT or in the Canadian Prairies.









Link:   small bale equipment 

Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us |
 02-26-2017, 05:03 Post: 35659
TomG



Join Date: 0000
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406
 Equiptment to Hay with..

Small round balers were the first types I remember. I also remember the ones my uncles had wrapped but did not tie the bales. That was a job for my cousins and me. If you look at a really old round baler that doesn't tie, it's good to have a bunch of kids that can be pressed into service.

I also seem to recall that the size of the bales were somewhat adjustable—one cousin used to complain about his brother who liked big bales and not too many trips to pick them up from the field. He’d want the bales stacked high on the wagon and expect us to fling the bales up high enough to put on another course. Don’t know; maybe brothers just like to complain about each other. Myself, I developed just some minor expertise with hay hooks and a few muscles.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us |
 02-26-2017, 19:46 Post: 35710
shadowcat5205



Join Date:
Location: Conesus NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 1
 Equiptment to Hay with..

price and size of hay tools greatly vary. Before you head to a dealer you may want to consider a few things

First - how many round (or squre) bales do you use a year. If you only use 20 - 30 or so round, it can be a lot more economical to buy hay. We use 200 - 250 a year so it was well worth doing my own. Same with square, at a couple of bucks a piece, 500 bales is only a grand, but if you use 1,000 or more a year, yes, it could be worth the venture

Of course a part of the equation is, do you have the hay available ? If so, and if there is a market in your area perhaps you can sell some to help pay for equipment

Second, if you decide "were gonna make hay" what do you have for a horse - PTO horse power, to be more exact.

I have a John Deere 5205 - that is about 48 PTO horse power. Alot of old dogs like myself remember the days of "square" bailing with my dads John Deere B (I still have the B, by the way) or an A, or JD 60 or the such. These tractors were low HP and handled a bailer nicely and there has not been a lot of changes on square style bailer operations - however, if you add a kicker/thrower - it does take a bit more PTO HP , but just as important, when you add the weight of the bailer and wagon with a 100 or so bales, it can get a bit hairy on side hills and the such.

I really would not want anything lighter or less PTO HP than I have now though. The 5205 is an economical tractor to operate too

a disk mower with a conditioner requries (normally, depending on cutting width, about 60 + PTO HP), you can get a small disk mower with a 7 ' or so cut and no conditioner for about 3500-4000 and run it with 45 - 50 HP.

A mower conditioner (cycle bar style) is a good alternative to a disk mower.

My equipment:

Mowing: For years we used a cycle bar style mower. Never again - I found an old case IH 1190 ( 9' cut ) mower conditioner for $1,500 and put another 200 into it. I love it. I do primarily timothy and birdsfoot - even in early spring, I cut one day and tedder it the next and rake and bale the third. Later in the summer I can mow/condition one day, rake and bale the next. Nothing will make a man cry more than having 5 or so acres of hay down and then get a 2 day rain :- (

Tedder: I dont even own my own yet, I borrow a neibors but do need to pick one up. A used one goes for 1,000 to 1,500. I have seen them for less, but, not too often

Rake: old rakes are all over the country and I bet you can find an old John Deere or IH or New Idea (used idea eh) for a lot less then a thousand. Sure, you can go to a dealer and spend a couple of grand, for a piece of machinery you use 6-8 weeks a year. For My money ($ 600 to be exact) I found a IH rake that I have used for 4 years. Its a bit old so to have a back up, I purchased an old john deere rake as a back up for another 300.

Yes - the new rakes rake a fluffier windrow - but again, I really cant see 1,500 - 3,000 for a used rake

square bailer: I used an old John Deere T12 for a long time. I watched the auctions and finally picked up a JD 336 with a kicker for 3,000 last year. Now remember - the kicker presents another situation - ya gotta buy or build basket wagons. watching the local paper, I found a couple of old wagons for 400 each. they arent pretty - but again - for 6-8 weeks a year - they are just lovely.

Round bailer: I purchased an old Hesston round bailer a few years back for 2,000. It required 50 PTO HP and I ran it with an old John Deere 60 (before I got the 5205) It worked and I used it for two years while I went to auctions and I finally bit and got a Case IH 8430 bailer, that only requires 45 HP to operate.

It makes a 4 X 4 bale about 800 lbs. I paid 4,500 for the bailer and have been offered 7 K for it. The round bailer will be the most expensive of your hay tool purchases.

I guess what I have found is, talk around, check out auctions and ask questions. make sure you dont get equipment that is too much for your tractor. Also make sure that when you buy used that there is a dealer for parts somewhere not too far away - nothing sucks more than a break down on a nice sunny day with a bunch of hay down.

Hope this helps - if I can be of any help, please drop a note.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us |
 02-27-2017, 00:41 Post: 35734
SOB1
2017-02-27
Post: 35734
 Equiptment to Hay with..

Thanks guys for all of your input on the haying idea.... I think I'll take your advice.. and BUY HAY!

SOB






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us |
Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Feeding Forum

Thread 35656 Filter by Poster:
Peters 1 | shadowcat5205 1 | SOB1 2 | TomG 1 |

 (advanced search)



Unanswered Questions

Gas Generator Weather Protecti
Horse Injured Polyrope Electri
Do electric fences keep out de
Any Peruvian Paso Owners Out T
gas powered post driver
My new born foal is really sic
Trailer Axle
dump trailer blueprints


Active Subjects

Gas Generator Weather Protecti
Went to see Dennis Reis this w
Signs to look for prior to lab
leg injury
Broodmare has welts all over h
Some Christmas Humor For Horse
poles in the ground vs. concre
ever thought about moving?


Hot Topics

new app owner
Some Christmas Humor For Horse
Any Peruvian Paso Owners Out T
Heating a Garage
Gas Generator Weather Protecti
Do electric fences keep out de
gas powered post driver
Trailer Axle


Featured Suppliers

Mountain Creek Labradoodles
      MountainCreekLabradoodles.com





New Forums on Gun Sport Shooting and Hunting -- BarrelPoint.com  New Forums on Horses ManePoint.com
Talk Horses at ManePoint
Hunting + Gun Sports at BarrelPoint



Most Viewed

+ ever thought about moving?
+ Do you lend your tractor?
+ Do electric fences keep out deer?
+ Thought this would be the place to ask.........
+ Clover over septic field. Good? Bad? Ugly?
+ TRACTOR TAX WRITE/OFF
+ $$ returns per acre?
+ Side-Hill Operaion
+ Some Christmas Humor For Horse and Bud Lite Lovers
+ What to do with Horse manure pile?

Most Discussion

+ ever thought about moving?
+ TRACTOR TAX WRITE/OFF
+ Side-Hill Operaion
+ Clover over septic field. Good
+ re: homeowner insurance
+ Do you lend your tractor?
+ DUMP TRAILERS HAULING YOU TRAC
+ Who are the Top 10 CUT Manufac
+ Thought this would be the plac
+ Research Participants Needed i

Newest Topics

+ Some Christmas Humor For Horse and Bud Lite Lovers
+ Feed Rebate for Triple Crown products?
+ Hay Prices and Preferences
+ More Pond Questions
+ Maintaining a horse pasture
+ Yard hydrant adjustment question
+ deer feed plot planting
+ Horse Pasture Rent
+ TV program for us hobby guys
+ Do electric fences keep out deer?
















Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines